Imperial 12x8
Product Downloads:
The Imperial is a 12 input, 8 output component video matrix switch with input pass through connections. The pass through connections are high bandwidth buffered copies of all the input signals, before the matrix switch. These pass throughs can be used to connect to an additional matrix, adding another 8 outputs. Up to 6 Imperials can be stacked to create a full non-blocking 12×48 matrix.
The ideal application for the Imperial is in sports bar or similar retail environments where a large number of displays are required. Typically with these systems audio is handled seperatly, as you would not want 48 displays all with their own volume control. The usual installation would probably have only 4 to 8 zones of audio, therefore a seperate multichannel amp system can be used.
Features
- Component video (YPbPr)
- Full non-blocking matrix - all outputs can display the same signal, or different signals.
- NeoTouch™ front panel - no moving parts to jam.
- Mutliple control inputs - RS-232, USB, IR detector (front) and wired IR (rear)
- Highly visible Vacuum Fluorescent Display (VFD)
- Full discrete power control functions
- Front panel lockout and blackout
- Black rack mount kit included (silver on request)
- Black or silver chassis, both with black front panel
- IR codes available in several formats for easy integration
Specifications
Power Inlet: IEC 320-C14
Input Voltage: 90-240VAC 50-60Hz, 9W typical
Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
Weight: 12 lbs
Video bandwidth through matrix section: 140MHz+ (full 1080p)
Video bandwidth pass throughs: +/- 0.8 dB over 150MHz
Video bandwidth through 6 units: +/- 1 dB over 140MHz
RS-232: 9600 baud, full two way protocol
USB: Slave device, Windows driver included, MAC and Linux drivers available - installs as virtual COM port at 9600 baud
Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive