Borrego 8x4
Product Downloads:
The Borrego is an 8 input matrix switch with 4 or 8 outputs, designed for switching and distribution of high definition video and digital and analog audio. Optionally, the digital audio section can be used for switching composite video.
The Borrego is like having three independent matrix switches in one unit. Component video, digital audio/composite video, and the analog audio can all be controlled seperately, allowing for maximum flexibility.
Features
- Component video (YPbPr)
- Left and right analog audio
- Digital audio (SPDIF coax), doubles as composite video matrix
- Full non-blocking matrix - all outputs can display the same signal or different signals
- Independent audio and video switching - digital and analog audio can be switched independently
- NeoTouch™ front panel - no moving parts to jam
- Mutliple control inputs - RS-232, USB, IR detector (front) and wired IR (rear)
- Highly visible Vacuum Fluorescent Display (VFD)
- Full discrete power control functions
- Front panel lockout and blackout
- Black rack mount kit included (silver on request)
- Black or silver chassis with choice of black or white front panel
- IR codes available in several formats for easy integration
Specifications
Power Inlet: IEC 320-C14
Input Voltage: 90-240VAC 50-60Hz, 8W typical
Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
Weight: 12 lbs
Video bandwidth: 140MHz+ (full 1080p)
Analog audio bandwidth: 0 Hz to 200KHz
Digital audio modes: PCM, LPCM, Dolby, DTS
Digital audio/C-video bandwidth: 20MHz
RS-232: 9600 baud, full two way protocol
USB: Slave device, Windows driver included, MAC and Linux drivers available - installs as virtual COM port at 9600 baud
Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive